EVALUATION OF EFFECTS OF SELECTED FACTORS ON ADSORPTION KINETICS OF LEAD ION REMOVAL FROM AQUEOUS SOLUTIONS
- Authors
-
-
A Amoko
Department of Chemistry, Adeyemi Federal University Education, Ondo, Nigeria
-
S JUSTINAH
Department of Chemistry, Adeyemi Federal University Education, Ondo, Nigeria;
-
A Fehintola
Department of Chemistry, Adeyemi Federal University Education, Ondo, Nigeria;
-
O Ezekiel
Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
-
I Oke
at Civil and Environmental Engineering Department, Elizade University, Ilara- Mokin, Ondo State, Nigeria.
-
A Isaiah
Department of Civil Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
-
- Keywords:
- Lead, Adsorption Kinetics, Microsoft Excel Solver, Analysis of Variance, Mass of Adsorbents, Significant Factors
- Abstract
-
This paper presents a report on the removal of lead ions (Pb2+) from aqueous solutions through adsorption techniques using powdered corncobs. Corncobs were collected from Obafemi Awolowo University agricultural farm. The corncobs were washed with distilled water to remove impurities. The corncobs were dried at room temperature, pulverized, sieved into different particle sizes using standard sieve sizes and stored. Powdered corncobs (PCCS) were separated based on the size. Its micrograph structure, physical and chemical properties were determined using standard methods. The PCCS was used as an adsorbent to remove Pb2+ from aqueous solutions and raw water through batch processes. Effects of the mass of the adsorbent, the initial concentration of Pb2+, initial pH of the aqueous solution and particle size of PCCS on the adsorption kinetics and its models’ parameters were evaluated.
The study shown that moisture content of the PCCS was 7.29 %, volatile solid at 550oC and 1200oC were 96.88 % and 99.44 % respectively. It was also revealed that mass of adsorbent, pH, particle size of the adsorbent, initial concentration of Pb2+ and adsorption time were significant factors that had effects on adsorption of Pb2+ onto PCCS at 95 % confidence level. It was concluded that lead ion can be removed by PCCS, the mass of the adsorbent had significant effects on adsorption kinetics.
- References
- Downloads
- Published
- 2019-04-28
- Section
- Articles
- License
-
Copyright
With the submission of a manuscript, the corresponding author confirms that the manuscript is not under consideration by another journal. With the acceptance of a manuscript, the Journal reserves the exclusive right of publication and dissemination of the information contained in the article. The veracity of the paper and all the claims therein is solely the opinion of the authors not the journal.
How to Cite
Similar Articles
- A. O. Melodi, B. O. Akinloye, Transmission Capacity Enhancement for Nigerian Power Transmission Grid using TCSC and UPFC , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 8 No. 2 (2014): FUTA Journal of Engineering and Engineering Technology
- LADI OGUNWOLU, Adeyanju Sosimi, Toheeb Salahudeen, A MULTI-OBJECTIVE RESOURCE-CONSTRAINED PROJECT SCHEDULING PROBLEM USING GENETIC ALGORITHM , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- O. Z. Ayodeji, A. A. Adegun, S. A. Anjorin, DEVELOPMENT AND PERFORMANCE EVALUATION OF A SMALL-SCALE GROUNDNUT SHELLING MACHINE , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- S. S. Yaru, I. K. Adegun, Analyses of Biogas and Digestate from Cattle Dung Anaerobic Digestion , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 2 (2017): FUTA Journal of Engineering and Engineering Technology
- S. O. Olatunji, Drivers of Timely Payment in Public Building Projects in Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 2 (2019): FUTA Journal of Engineering and Engineering Technology
- Bamiji Zacheous Adewole, EXPERIMENTAL STUDY ON BED-TO-TUBE HEAT TRANSFER COEFFICIENTS IN BUBBLING FLUIDIZED BED , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 15 No. 2 (2021): FUTA Journal of Engineering and Engineering Technology
- Anthony T. Bolarinwa, Gideon C. Nwafor, OPEN PIT OPTIMIZATION AND PRODUCTION SCHEDULING OF OKOBO COAL MINE, CENTRAL NIGERIA , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 12 No. 1 (2018): FUTA Journal of Engineering and Engineering Technology
- Samuel Olusola Olatunji, An Assessment of the Barriers of Timely Payment in Public Building Projects in Ekiti State, Nigeria , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 13 No. 1 (2019): FUTA Journal of Engineering and Engineering Technology
- E.O. OLUKANNI, O.J. OYEDEPO, PHYSICO-RHEOLOGICAL CHARACTERIZATION OF POLYMER MODIFIED BITUMEN , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 14 No. 2 (2020): FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY
- E. I. Bello, I. A. Daniyan, T. I Ogedengbe, L. Lajide, P. B. Mogaji, Development of a Model for Predicting the Yield of Biodiesel During Biodiesel Production , FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY: Vol. 11 No. 1 (2017): FUTA Journal of Engineering and Engineering Technology
You may also start an advanced similarity search for this article.